01. |
Unroll and place so solar panel (dark side) is face up with orientation to sun.
|
02. |
With the grommets on each of the corners, use a tie cord to hold the panel in place. This is important to reduce loss or damage from high winds.
|
03. |
Ensure the solar panel cord out of the junction box is well connected to the included 15 ft. extension cord. (Fig. 1)
|
04. |
Identify the correct polarity! (Red +, Black -)
|
05. |
Attach the o-ring battery terminal connectors at the end of the extension cord to your 12 volt battery or the 12 volt device you are directly powering. (Fig. 2)
|
06. |
You may leave the panel permanently connected to your battery since there is an included blocking diode in the junction box that blocks reverse draining of current from your battery. As with any permanent connection to a battery, safely clean the connections on a periodic basis as needed.
|
07. |
To store the product, simply disconnect the cords and roll with the SOLAR PANEL FACING OUT. Use the attached Velcro® strip to hold the roll in place.
|
|
