Flexible Solar Cells: OEM Components

The OEM Components line consists of the most basic of flexible solar cell technology. There are 22 different cells in three different product lines to choose from, ranging in size, voltage, current, and encapsulation material. Each cell is created by depositing amorphous silicon on a thin plastic substrate and then encapsulating the cells in either a Polyester coating or heavy duty Tefzel, a DuPont product. The cells are paper thin and can be wrapped around almost any curved surface. The three product lines are the Electronic Series, the RC Aircraft Series, and the WeatherPro^TM Series. Each series has been designed with certain characteristics. The Electronics Series is perfect for integration into small portable electronics. The RC Aircraft Series has the best weight to power ratio as they were constructed with model aircraft in mind. The WeatherPro^TM Series was built for permanent fixture in the outdoors, as the Tefzel coating has a rated lifespan of 20 years.

PowerFilm® Wireless Electronics Series

Modules in the PowerFilm® Wireless Electronics Series offer a new opportunity to solve the old problem of limited power for wireless electronics for portable and remote applications. PowerFilm® Wireless Electronics modules are lightweight, paper thin, and durable. Their ultra-thin profile enables them to be easily integrated with devices for solar recharging or direct powering. Modules have been specifically developed to recharge AA, AAA, and 6 and 12-volt batteries. These modules do not have a UV-stabilized surface, but are suitable for intermitant outdoor use.

3.0V

3.0V @ 22mA

7.2V

7.2V @ 100mA

3.0V @ 25mA

3.0V @ 50mA

3.6V

3.6V @ 50mA

7.2V @ 200mA

3.6V @ 100mA

4.2V

4.2V @ 22mA

4.8V

4.8V @ 50mA

15.4V

15.4V @ 50mA

4.8V @ 100mA

6.0V

6.0V @ 50mA

15.4V @ 100mA

6.0V @ 100mA

PowerFilm® RC Aircraft Series

The PowerFilm® RC Aircraft Series modules are designed to be easily integrated with RC Aircraft. These PowerFilm® modules are very lightweight, can be soldered to from the back of the module via the extended copper tape, and have an extra edge seal for protection from fuel contamination and weather. Modules are available with Pressure Sensitive Adhesive (PSA) making installation a snap. These modules do not have a UV-stabilized surface, but are suitable for intermitant outdoor use. For connection, just solder to the copper tape.

7.2V

7.2V @ 100mA

7.2V @ 100mA

PowerFilm® WeatherPro Series

The PowerFilm® WeatherPro^TM Series is the right choice for permanent outdoor applications that are directly exposed to the elements. The especially rugged construction of these PowerFilm® modules includes a UV-stabilized surface, extra edge seal for weather protection, and tin-coated copper leads that extend from the module. Coating the leads with an RTV silicon compound can provide a tightly sealed package.

7.2V

7.2V @ 100mA

7.2V @ 200mA

15.4V

15.4V @ 50mA

15.4V @ 100mA

15.4V @ 200mA